Operation: 1. This tool is design for carver, engrave, rout, grind, sharpen, sand, polish, drill and more. 2. Unplug the tool form electrical outlet before loading a bit. 3. Press shaft lock button. Use the collet wrench to loosen the collet nut. Inset the bit (not included), and tighten the collet securely. But avoid excess tightening of the collet nut and never use a damaged bit. 4. There is an ON/OFF switch. When the switch is on, the tool runs at 3000 RPM.There is a switch indicator with an orange line on it. Slide the switch to find the speed needed from 3000-20,000RPM. Slide the switch to the black dot for complete stop. 5. When finished, turn off the tool and unplug it.

Operation:

1. This tool is designed for carving, engraving, routing, grinding, sharpening, sanding, polishing, drilling, and more.
2. Unplug the tool from the electrical outlet before loading a bit.
3. Press the shaft lock button. Use the collet wrench to loosen the collet nut. Insert the bit (not included) and tighten the collet securely. But avoid excess tightening of the collet nut and never use a damaged bit.
4. There is an ON/OFF switch. When the switch is on, the tool runs at 3000 RPM. There is a switch indicator with an orange line on it. Slide the switch to find the speed needed from 3000-20,000 RPM. Slide the switch to the black dot for complete stop.
5. When finished, turn off the tool and unplug it.